Table of Contents
Advertisement
20
en | Amplifier DSP
EXIT menu
The Exit menu is used to return to the home screen.
Notice!
The display returns to the home screen after two minutes of inactivity.
MODE menu
The Mode menu is used to configure the type of sound the subwoofer delivers.
–
–
–
–
SUB LEVEL Menu
The Sub Level menu allows independent gain control of the subwoofer output. Changes to
this parameter effectively change the crossover of the EVOLVE 50 system. The default setting
of 0 dB is recommended for best audio performance.
The range is MUTE, -80 dB to +10 dB.
The default is 0 dB.
OUTPUT EQ Menu
–
MIX OUT menu
The Mix Out menu is used to select which signal of INPUT 5/6 & 7/8 AUX IN should be output
at MIX OUT and which signal should be delivered by the loudspeaker.
–
–
DISPLAY menu
The Display menu options are BACK, LCD DIM, BRIGHT, and CONTRAST.
LED menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF, LIMIT or CONTROL APP.
–
–
–
–
2019-08 | 01 |
MUSIC – is used for recorded music playback and electronic dance music applications.
(Default)
LIVE – is used for live sound applications.
SPEECH – is used for spoken word applications.
CLUB – is used for recorded electronic music playback.
The OUTPUT EQ menu is used to adjust the frequency response of the loudspeaker for
different applications or personal preference. There are 11 different EQ filters available
centered at the following frequencies. 63, 100, 160, 250, 400, 630, 1.0k, 1.6k, 2.5k, 4.0k,
& 6.3k Hz. The range of each filter is -6dB to +6dB. The default value for each filter is 0
dB.
L+R: The left and right signals of INPUT 5/6 & 7/8 are summed. The sum is output at MIX
OUT and is delivered by the loudspeaker. (Default)
R: Only the right signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned
right is output at MIX OUT. The loudspeaker will deliver only the left signal.
ON - turns the LED on when the power to the loudspeaker is ON. (Default)
OFF - turns the LED off.
LIMIT - turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
CONTROL APP - indicates if Bluetooth® on the portable column system is trying to pair or
is connected to a Bluetooth® enabled mobile device. In pairing mode the LED will flash
blue indicating it is ready to pair. The LED is solid blue when it is connected.
Installation manual
EVOLVE Portable Column Loudspeaker
Electro-Voice
Advertisement
Table of Contents
