Table of Contents
Advertisement
EVOLVE Portable Column Loudspeaker
–
3.2
Quick setup
Subwoofer
To set up a subwoofer, do the following:
Step
Connect the AC power cord from a grounded
line receptacle to the MAINS IN.
Connect the XLR or TRS cables from an audio
source to INPUT 1 or INPUT 2 or connect the
RCA cable or 3.5 mm mini jack from an audio
source to INPUT 3.
Adjust the input gain to
Switch POWER to ON.
From the DSP home screen, increase the input
gain to the desired sound output.
Adjust the MASTER VOL knob to the desired
volume.
Electro-Voice
QuickSmartDSP provides best-in-class processing via EV's signature single-knob user
interface with LCD. Easy setup via four presets (Music, Live, Speech, Club), multi-band
EQ (low, mid, high), five user-programmable presets (Store and Recall settings), output
delay, phantom power, visual monitoring of limiter status, input level control and meters,
and master volume control to optimize gain structure.
Illustration
(infinity).
Installation manual
Description | en
POWER
ON
OFF
13
FUSE T5AL/250V
REPLACE AS MARKED
OPERATING VOLTAGE / TEGANGAN:
100-240V AC / 50-60 Hz
2019-08 | 01 |
Advertisement
Table of Contents
