System Status - Electro-Voice ZLX-G2 User Manual

ZLX-G2 Full-range loudspeaker
3.
4.
5.
6.
7.
8.
9.
7.2

System status

Normal
1.
2.
3.
4.
5.
6.
7.
8.
Bosch Security Systems, LLC
Input selection soft keys - Press the soft key to select the input and access the DSP
control menu for the channel. Press the softkey a second time to deselect the channel
and return to the main DSP.
INPUT 1 - Balanced INPUT for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼-inch TRS or XLR
connectors. The XLR connector is switchable for 24V phantom power.
INPUT 2 - Balanced INPUT for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼-inch TRS or XLR
connectors
MIX OUT - XLR output sends either the mix of all input signals or the stereo L or stereo
R signal to another loudspeaker or subwoofer.
Hi-Z - High impedance connection to connect an instrument or high impedance
microphone via a ¼-inch TS cable. Shared with INPUT 2.
MAINS IN – AC connection is established via an IEC-connector.
POWER - Switch for power ON or OFF of the loudspeaker. The LCD screen lights up
when the power is turned ON, after approximately three seconds.
Indicates the master gain of the system in dB. The range is from -80 dB to +10 dB, in
1 dB increments.
IN 1 - VU meter displays the signal level of INPUT 1 into the amplifier INPUT 1
connector. The display of PHANTOM indicates 24V phantom power is switched on.
Input level control for IN 1.
IN 2 - VU meter displays the signal level of INPUT 2 into the amplifier INPUT 2
connector.
Input level control for IN 2.
BT - VU meter displays the signal level of INPUT BT into the amplifier from Bluetooth®
streaming connection.
Input level control for BT.
M - VU meter displays the signal level of the MAIN output.
User manual
Amplifier DSP | en 21
2023-10 | 01 |