Do you have a question about the EVOLVE30M-US and is the answer not in the manual?
Questions and answers
David Alcantara
April 23, 2025
I have a turntable connected to a marantz SR5015. Is it possible to get the signal from the turntable into the marantz then into my EV 30M?
1 comments:
Mr. Anderson
May 12, 2025
Yes, the Electro-Voice Evolve 30M can be connected to a Marantz SR5015 to receive a signal from a turntable, but only if the turntable signal is properly pre-amplified.
The Evolve 30M has multiple input options, including XLR/TRS combo line inputs, RCA, and 3.5 mm stereo input. If the Marantz SR5015 is connected to the turntable and outputs audio through its pre-out or zone-out connections, you can route that signal to the Evolve 30M using a compatible cable (e.g., RCA to 3.5 mm or RCA to XLR/TRS).
Ensure the turntable has a built-in preamp or is connected through a phono preamp before sending the signal to the Marantz and then to the Evolve 30M.
Need help?
Do you have a question about the EVOLVE30M-US and is the answer not in the manual?
Questions and answers
I have a turntable connected to a marantz SR5015. Is it possible to get the signal from the turntable into the marantz then into my EV 30M?
Yes, the Electro-Voice Evolve 30M can be connected to a Marantz SR5015 to receive a signal from a turntable, but only if the turntable signal is properly pre-amplified.
The Evolve 30M has multiple input options, including XLR/TRS combo line inputs, RCA, and 3.5 mm stereo input. If the Marantz SR5015 is connected to the turntable and outputs audio through its pre-out or zone-out connections, you can route that signal to the Evolve 30M using a compatible cable (e.g., RCA to 3.5 mm or RCA to XLR/TRS).
Ensure the turntable has a built-in preamp or is connected through a phono preamp before sending the signal to the Marantz and then to the Evolve 30M.
This answer is automatically generated