Smart Tow Settings - Mercury MercMonitor Manual

7. Press the "–" to highlight the "Exit" option and press the
"MODE" button to exit the "Clock" menu.

Smart Tow Settings

The "SmartTow" setting allows the user to select the type of
speed sensor to use when Smart Tow is in use. "SmartTow"
settings also allows the user to select the type of speed filter to
use. Choose to turn the filter off, low, medium, or high. Choosing
"OFF" has the most sensitivity and will maintain the vessel speed
with less fluctuation in the actual speed. Use the filters if the
paddle wheel speed is unstable causing unwanted engine RPM
fluctuation. The "LOW" filter setting is the most responsive and
will allow more actual speed fluctuation than when the filter is
turned "OFF." The "HIGH" filter setting is the least responsive
and will allow the most speed fluctuation and will slow the rate at
which the speed changes.
1. While in the "Main Menu," press the "–" or "+" button to
highlight the "Settings" menu.
2. Press the "MODE" button to enter the "Settings" menu.
3. Press the "–" button to highlight the "SmartTow" menu.
SETTINGS
Main Menu
Propulsion / ST
Vessel
Favorites
Alarms
!
Settings
MODE
56
33077
eng