If the paddle wheel source was selected, the Paddle Wheel Speed Setup screen will appear. Use the Paddle Wheel Sensor
Type drop‑down to select the appropriate option. After selection, highlight Next using the RIGHT arrow button and press
ENTER to continue.
Finishing Setup Wizard
Highlighting Finish using the RIGHT arrow button and pressing ENTER will complete the Setup Wizard on the VesselView. Do
not power off the unit until the Finish screen is replaced by the vessel activity screen.
90-8M0087257
DECEMBER 2014
eng
a -
Paddle wheel sensor type field
a
56828
Section 2 - Initial Screens and Setup Wizard
56814
Page 15