Device Setup; Units Setup - Mercury VesselView 4 Manual

Section 2 - Initial Screens and Setup Wizard

Device Setup

In the Device Setup screen, use the RIGHT and LEFT arrow buttons to highlight the drop‑down menus. If using multiple
VesselView devices, be sure to assign unique numbers to each unit, to avoid data problems. Helm numbers should match the
location of the individual VesselView unit. Highlight the Next field to continue.

Units Setup

Select the units of measure that VesselView will display on‑screen data; speed, distance, and volumes. Particular units of
measure can be changed later. After selecting the units of measure, highlight the Next field and press ENTER.
Page 12
a - VesselView device number
b - Helm location number
a
b
56802
a - Units of measure drop‑down menu
a
56802
90-8M0087257 DECEMBER 2014
eng