Installing Hold-Down Kit - Vecow RCX-1500 PEG User Manual

3.11 Installing Hold-down Kit

Step 1 Fasten screws on two sides of the main frame. (The default
position is L2 and R2, however, the position L1 and R1 / L3 and R3
are adjustable due to different card length.)
Step 2 Fasten two screws on the hold on the bar (marked in yellow) after
fitting the card by adjusting the pad left and right.
Step 3 Fix the screws (marked in red) left or right with Phillips
screwdriver to adjust the height of the hold on bar.
©Vecow RCX-1500 PEG User Manual
R1 R2 R3
L1 L2 L3
down
up
SYSTEM SETUP 60