Vecow RCX-1500 PEG User Manual page 38

2.3.10 CN8 : Internal USB 2.0 Port
The USB 2.0 connections available supporting up to 480Mbps. It also compliant
with the requirements of high speed (HS), full speed (FS) and low speed (LS).
The pin assignments of CN8 are listed in the following table :
Pin No.
1
3
2.3.11 JUSB1 : Internal Dual Port USB 2.0
JUSB1
The RCX-1500 PEG main board provides up to two expansion USB ports using
plug-and-play for Dongle Key or LCD touch panel. The USB interface supports
480Mbps transfer rate which complies with high speed USB specification Rev.
2.0 and are fuse protected.
The USB interface is accessed through one 1x10-pin JST 1.0mm connector. You
will need an adapter cable if you use a standard USB connector. The adapter
cable has a 1x10-pin connector on one end and a USB connector on the other.
The pin assignments of JUSB1 are listed in the following table :
©Vecow RCX-1500 PEG User Manual
Definition
+V5_USB7_PWR
USB_D_11P
CN8
Pin No.
2 USB_D_11N
4
GETTING TO KNOW YOUR RCX-1500 PEG
Definition
GND
31