Table of Contents
Advertisement
6. Select disks to create RAID Volume then Save Changes and Reset to install
OS with EFI mode.
C.2 OS Installation
The system is featured with six SATA, including four internal SATA, one mSATA
and one CFast.
You can select one of the SATA ports for OS installation.
We used CFast card for Windows 10 OS installation as an example.
C.3 To Install All Device Drivers of the System
The instructions are as follows :
1. Install Chipset driver
2. Install Network driver
3. Install ME driver (if available)
4. Install Audio driver
5. Install VGA driver
C.4 To Install "Intel Rapid Storage Technology"
Software
You can get the software from driver CD.
Also, you can find the latest information and software directly from Intel's website.
http://www.intel.com/p/en_US/support/highlights/chpsts/imsm
The RAID environment has been done if you completed the steps above.
©Vecow RCX-1500 PEG User Manual
Appendix C
93
Advertisement
Table of Contents
