Vecow RCX-1500 PEG User Manual page 87

4.5.1 HDD Security Configuration
Figure 4-5-1 : HDD Security Settings
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***
Discard or save changes option in setup does not have any impact on HDD
when password is set or removed. If the 'Set HDD User Password' option is
gray, do power cycle to enable the option again.
4.5.2 Security Boot
Figure 4-5-2 : Security Boot Settings
Attempt Secure Boot
Secure Boot activated when Platform Key (PK) is enrolled, System mode is
User/Deployed, and CSM function is disabled.
Secure Boot Mode
Secure Boot mode selector Standard/Custom.
In custom mode Secure Boot Variables can be configured without authentication.
Key Management
Enables expert users to modify Secure boot policy variables without full
authentication.
©Vecow RCX-1500 PEG User Manual BIOS AND DRIVER 80