Table of Contents
Advertisement
5 Installer instructions
5
Installer instructions
5.1
Changing installer parameters
Fig.52
Step 2
Fig.53
Step 3
Fig.54
Step 4
Fig.55
Step 5
Fig.56
Step 6
Fig.57
Step 7
Fig.58
Step 8
Fig.59
Step 9
Fig.60
Step 10
16
The parameters in the Installer Menu must only be changed by a qualified
professional. Code
rameters.
Important
First, select a device, control PCB or zone to view or amend a set
ting.
Caution
Modification of the factory settings may impair operation of the de
vice, control PCB or zone.
1. Navigate to the Installer menu.
2. Press the
MW-3000312-01
3. Keep pressing the
MW-3000313-01
4. Press the
MW-3000314-01
5. Keep pressing the
zone is displayed.
MW-3000406-02
6. Press the
MW-3000407-01
7. Keep pressing the
played.
MW-3000315-01
8. Press the
MW-3000336-01
9. Press the
MW-3000337-01
10. Press the
MW-3000338-01
must be entered in order to change the pa
key to open the menu.
key until the code
key to confirm opening the menu.
key until the required device, control PCB or
key to confirm the selection.
or
key until the required parameter is dis
key to confirm the selection.
or
key to modify the value.
key to confirm the value.
is displayed.
7667004 - v.01 - 12072017
Advertisement
Table of Contents
