Cable Requirements; Port Pinouts - Allied Telesis IA Series Installation Manual

Cable
The cable requirements of the ports are given in Table 1.
Requirements

Port Pinouts

See Table 12 on page 49 for the port pinouts of the 10/100Base-T twisted
pair ports.
Table 1. Twisted Pair Cable for the 10/100Base-TX Ports
Cable Type
Standard TIA/EIA 568-B-compliant
Category 3 shielded or unshielded cabling
with 100 ohm impedance and a frequency
of 16 MHz.
Standard TIA/EIA 568-A-compliant
Category 5 shielded or unshielded cabling
with 100 ohm impedance and a frequency
of 100 MHz.
Standard TIA/EIA 568-B-compliant
Enhanced Category 5 (Cat 5e) shielded or
unshielded cabling with 100 ohm
impedance and a frequency of 100 MHz.
Standard TIA/EIA 568-B-compliant
Category 6 or 6a shielded cabling.
IA Series Ehternet Switches Installation Guide
10Mbps 100Mbps
Yes No
Yes Yes
Yes Yes
Yes Yes
13