Installing the Switch on a Table or Desktop
You may install the switch on a table or desktop. To install the switch on a
table or desktop, perform the following procedure:
1. Remove all the items from the packing.
2. Store the packaging material in a safe place.
3. Attach the 3-pin terminal block to the switch as shown in Figure 5.
Figure 5. Attaching the 3-in Terminal Block
4. Attach rubber feet as shown in Figure 6.
Figure 6. Attaching the Rubber Feet
5. Place the switch on a flat and secure surface, leaving ample space
around the switch for ventilation.
6. Proceed to Chapter 4, "Cabling the Networking Ports" on page 35 for
the cable installation.
IA Series Ehternet Switches Installation Guide
27