Table of Contents
Advertisement
Adding Device Credentials to the WLSE
Step 4
Step 5
Enter HTTP Credentials for Non-IOS Access Points
Step 1
Step 2
Step 3
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
5-4
To delete an entry:
Select the entry in the list of entries. To select a number of entries, use the
a.
Ctrl or Shift key.
Click Delete.
b.
The default entry cannot be deleted.
Note
Click Save to apply your changes.
HTTP credentials are required for downloading configuration files to non-IOS
access points and for uploading configuration from such access points. The same
password must be set on each access point. You can enter as many usernames and
passwords as necessary.
To enter HTTP usernames and passwords:
Select Devices > Discover > Device Credentials > HTTP User/Password.
To add a username and password:
Enter the access point IP address or range of IP addresses that will use this
a.
username and password.
Enter the username.
b.
Enter the password.
c.
Click Save. The IP address and username are added to the Current Entries
d.
textbox.
Repeat step 2 to add credentials for more devices.
Chapter 5
Setting Up Discovery and Device Management
78-16778-01
Advertisement
Table of Contents
