Cisco CiscoWorks WLSE 1130-19 Installation And Configuration Manual page 52

Installing WLSE 1130-19 Hardware
c.
Figure 2-3
Note
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
2-16
See Figure 2-3. Using a screwdriver (1), push the middle rail to the end of the
rail.
Telescoping the Rail
1
To allow for adjustment later in the installation, do not tighten any screws.
The outer rail/bracket assembly with extended bracket (1) must be
assembled to the left side.
Chapter 2 Installing WLSE 1130-19 Hardware
78-16778-01