Cisco CiscoWorks WLSE 1130-19 Installation And Configuration Manual page 55

Chapter 2 Installing WLSE 1130-19 Hardware
g.
Figure 2-6
Note
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16778-01
Extend the middle rail about 30 cm and fasten with screws. See
Then, push the middle rail back into its original position.
Attaching Screws to Telescopic Rail
1
4
Leaving some play between the bracket and the rail until you install the
rail into the rack will make affixing the rail to the rack easier. After the
rail is attached to the rack, you can tighten the screws.
Installing WLSE 1130-19 Hardware
2
5
Figure 2-6.
3
2-19