Installing The Device; Safety Instructions For Installation; Notes On Installation - Siemens SIPROCESS GA700 Operating Instructions Manual

Continuous gas analysis, wall-mounted device
Hide thumbs Also See for SIPROCESS GA700:
Table of Contents

Advertisement

Installing the device

6.1

Safety instructions for installation

Protection against incorrect use of the wall-mounted device
Only use the wall-mounted device within the voltage limits specified on the nameplate.
Damage to the membrane keyboard
Make sure that the membrane keyboard is not damaged during installation of the wall-
mounted device.
NOTICE
The wall-mounted device may only be opened for installation, for connection to the
electricity supply, or for maintenance.
6.2

Notes on installation

Note
Protect the wall-mounted device from:
• Direct thermal radiation
• Mechanical damage
The installation location should be:
• easily accessible
• free from vibration
• within the ambient temperature limits
Note
Air circulation
Ensure that heat does not build up at the place of installation. Ensure that there is a sufficient
circulation of air around the wall-mounted device.
If more than one wall-mounted device is installed, there should be a lateral distance of ≥
5 cm between them.
Wall-mounted device
Operating Instructions, 01/2013, A5E31930403-01
WARNING
CAUTION
6
37

Advertisement

Table of Contents
loading

Table of Contents