INSTALLATION INSTRUCTIONS Polaris™ Universal Projector Mount Model: MAG-EXT NORTH AMERICA EUROPE 3130 East Miraloma Avenue Swallow House, Anaheim, CA 92806 USA Shilton Industrial Estate, USA and Canada Shilton, Coventry, England CV79JY Phone: 1.800.368.9700 Phone: +44 (0) 2476 614700 Fax: 1.800.832.4888 Fax: +44 (0) 2476 614710 Other Locations Phone: (001).714.632.7100...
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY...
⅛˝ Wood Drill Bit Tape Measure Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. MAG-EXT Mount Hardware...
MAG-EXT Features Congratulations on the purchase of your new Premier Mounts Polaris™ Universal Projector Mount. Your MAG-EXT Mount may be secured to either a single ceiling stud or a solid surface ceiling, such as concrete. The Polaris™ features our exclusive MagnaGuide™ Technology which assists the installer for quicker installation times and peace of mind.
If your projector has multiple mounting points, proceed to the “Multiple Mounting Point Installation” section. If your projector has a single mounting point, skip to the “Single Mounting Point Installation” section. Installation Instructions Page 5 Visit the Premier Mounts website at http://www.mounts.com...
Insert and tighten the mounting screw. ² Attach theft deterrent device (PCB-CSL1 or padlock) through the hole that is on the security barrel. PCB-CSL1 Padlock (Combination or Keyed) Page 6 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
¯ When the desired position is achieved, tighten the mounting screws to the projector and then tighten the hex head leg screws with the M5 Allen wrench. Installation Instructions Page 7 Visit the Premier Mounts website at http://www.mounts.com...
Page 8
Projector Plate. If the M6 square nut is not aligned with any slot, you can use any thin implement, such as a toothpick, to nudge it into alignment. Page 8 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Projector Plate to the projector if your projector has only one mounting point. Do not overtighten the ¼-20 x screw. ″ Proceed to the “Installating the MAG-EXT Mount” section. Installation Instructions Page 9 Visit the Premier Mounts website at http://www.mounts.com...
THE MAGNETS ARE USED FOR GUIDING THE UNIT ONLY! PLEASE MAKE SURE THE TWO (2) M4 X 12MM SCREWS ARE USED TO SECURE THE PROJECTOR. Page 10 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
¯ Firmly grasp the projector in both hands and rotate side to side for orientation adjustment. ° Tighten both M5 set screws using the M5 Allen wrench. Installation Instructions Page 11 Visit the Premier Mounts website at http://www.mounts.com...
Retighten the two (2) M6 x 12mm security screws. Do not release the projector until the M6 screws are completely tight. M6 x 12mm Security Screw Technical Specifications All measurements are in inches [millimeters]. Page 12 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the Polaris MAG-EXT and is the answer not in the manual?
Questions and answers