Preface; Warnings And Safety; Printing Conventions Used In The Manual; Glossary - gefran eView BOX Installation And Instruction Manual

Internal cabinet control panel
Hide thumbs Also See for eView BOX:
Table of Contents

Advertisement

Warnings and safety

While all the information contained in this manual has been
carefully checked, Gefran S.p.A. accepts no responsibility for
the possible presence of errors or for damage to persons
and/or property caused by the improper use of the manual.
Gefran S.p.A. also reserves the right to make changes to the
contents and form of this manual and to the characteristics of
the devices illustrated at any time and without prior warning.
The installation of the devices illustrated in the manual must
be carried out by qualified technicians in compliance with
the laws and standards in force and in agreement with the
instructions contained in the manual.

Printing conventions used in the manual

Pay attention to the use of the following symbols
Highlights particularly important information which
influences the correct operation of the product or
of safety or an instruction which must absolutely
be followed.
Highlights a risk condition for the safety of the
installer or the user, due to the presence of
dangerous levels of voltage.

Glossary

Bootloader
Program that, in the startup (boot), loads
the PLC.
Checksum
Sequence of bits that is used to verify the
integrity of a file
COBID
Communication OBject IDentifier, identifi-
cativo a 11-bit identifier of a CAN frame.
MD5
Algorithm used to calculate the checksum
of the file
PDO
Process Data Object.
SDO
Service Data Object.
Watchdog
Supervision system hardware or software
that recovers temporary and brief system
malfunctions.
4

PREFACE

If the eView BOX internal cabinet control panel is used in
applications with the risk of damages to persons, machinery
or materials, its use in conjunction with alarms is essential.
It is advisable to envisage the possibility of checking the
intervention of the alarms during regular operation.
Before interacting with the eView BOX internal cabinet
control panel, the operator must receive full training in
the procedures of operation, emergency, diagnosis and
maintenance of the system.
80949_MAN_eView BOX_05-2019_ENG

Advertisement

Table of Contents
loading

Table of Contents