Main Power Supply - gefran eView BOX Installation And Instruction Manual

Main power supply

The system is powered with ONE (1) power supply as shown in figure 8.
eView BOX
Internal cabinet control panel
P S
To power the system correctly, make sure that:
• The power supply has the power needed to run the system
and any additional resources connected to it.
• Ground the power supply (GND) with a wire that is straight and
as short as possible (PE).
• Ground the eView BOX ground terminal and the with a
wire that is straight and as short as possible (PE).
10
F errite
B ead
+24Vdc
0V
PE
Figure 8: Single power supply
• Insert the ferrites into the power supply cables as close as
possible to the eView BOX Control Panel.
• The system power supply line must have a different path
from the plant and machine power cables.
A UXIL IA R Y
DE V IC E S
80949_MAN_eView BOX_05-2019_ENG