Table of Contents
Advertisement
correction due to switching to or from solar time/daylight
savings time. Note: this management is not automatic. The
operator has to change this selection manually every time solar
time switches to daylight savings time and vice versa.
See the Remote Connections paragraph in the GF Project VX
manual for information and details on SNTP/NTP management.
To confirm changes to the configuration, click SAVE.
Information
Gives information on installed firmware versions, allows
access to log files, and lets you check the installed GAB
version.
•
bootrom.sys shows the bootrom version
(system bootloader).
•
gefran.os shows the terminal BSP version.
•
seven.out shows the active firmware version on the
terminal.
•
seven.jar shows the active Java firmware version on the
terminal
•
rotary shows the current position of the 16-position
rotary selector (see figure 15 N.13)
•
rotary at start up shows the position of the rotary selector
detected at terminal power-on.
Attention: the page shows only the informations
found
Press Home to return to the main menu.
Log Files
Press the log files button to work on Log files.
The following page appears:
26
The pull-down menu at the top lets you activate a content
display filter. The options are:
•
LOG: text file containing diagnostics
•
ERR: text file used to save any errors.
The list of found files is shown in the left panel
The pull-down menu at the bottom lets you select the saving
device to be checked when searching files.
Disk free space shows the free space on the selected saving
device
Select Save exceptions to file to activate the saving of any
system exceptions in a diagnostics file (SYSERR_dataora.
log).
The change will take effect at the next reboot
Attention: This setting is always overwritten when
you load a program with GF_ProjectVX.
If you select a file in the left panel, keys on the right activate
to let you see file contents (Show file) copy contents to a
USB drive inserted in the control panel (Copy to USB) and
delete the file (Delete).
Attention: Deletion cannot be undone: the file is
deleted permanently
Press Home to return to the main menu <<-back to return to
the previous menu.
80949_MAN_eView BOX_05-2019_ENG
Advertisement
Table of Contents
