Assembly And Installation; Assembly Control Panel; Hole Dimensions; Protection Against Infiltrations Of Water - gefran eView BOX Installation And Instruction Manual

Internal cabinet control panel
Hide thumbs Also See for eView BOX:
Table of Contents

Advertisement

ASSEMBLY AND INSTALLATION

Assembly Control Panel

Hole dimensions

For correct installation, observe the dimensions of the
templates shown in the illustration.
Figure 11 - Hole dimensions for installation of the internal cabinet control panel
Protection against infiltrations of
water
The internal cabinet control panel offers an IP20 protection
level.
If the product has to be used in an environment in which a
protection level higher than IP20 is required, this must be
guaranteed by the cabinet that hosts the product itself.

Vibration

The internal cabinet control panel can support vibrations:
from 5 to 9 Hz: sinusoidal 3.5 mm constant;
from 9 to 150 Hz: sinusoidal with acceleration equal to
1 G
Should the device be mounted on a support that exceeds
these limits it is necessary to envisage a system for the
suspension and mitigation of the vibrations.
16
Attention:
cabinet control panel is mounted has to have
the following characteristics:
• be sufficiently stiff and strong so that it does
not bend during use;
• be between 1 and 6 mm thick, to allow the
fastening of the device with the terminals
supplied.
217

Minimum spaces for ventilation

The temperature of the compartment that houses the internal
cabinet control panel must not exceed 55°C.
Figure 2 free spaces for ventilation show the minimum free
distances recommended in the installation of the device in a
closed compartment

Positioning

The internal cabinet control panel has to be positioned in
order to guarantee the following conditions:
If necessary, screen direct rays, using an antiglare
shutter for example;
there must be no sudden temperature changes;
there must be a low explosion risk: it can be connected to
elements that operate in environments with a hazardous
atmosphere (flammable or explosive) only through
appropriate and suitable types of interface, compliant to
the safety standards in force;
low presence of magnetic fields.
80949_MAN_eView BOX_05-2019_ENG
the panel on which the internal

Advertisement

Table of Contents
loading

Table of Contents