Table of Contents
Advertisement
Fastening
The internal cabinet control panel can be installed in two
ways:
• horizontal on DIN 35 mm track, Fig.12.
• vertical, Fig.13.
• Horizontal mounting:
Install the 2 brackets for the DIN 35 track as shown in Fig.12.
Fasten the product and press hard to complete the operation,
rotating downwards.
80949_MAN_eView BOX_05-2019_ENG
• Vertical mounting:
Prepare the M5 threaded holes, done with the template as
shown in Fig.11, position the product and screw in place as
shown in Fig.13.
Warning: install locking washers to prevent the screws from
loosening!
Figure 12 - Installation on DIN track
Figure 13 - Vertical installation
17
Advertisement
Table of Contents
