Table of Contents
Advertisement
MAINTENANCE AND DIAGNOSTICS
WEEE Information
Pursuant to Article 26 of Italian Legislative
Decree
"Implementation of Directive 2012/19/EU on
waste electrical and electronic equipment
(WEEE)".
The symbol showing a crossed-out wheeled bin on
equipment or its packaging indicates that the product must
be collected separately from other waste at the end of its
useful life.
The manufacturer is responsible for organising and managing
Local diagnostics
Control Panel
In the event of any malfunctions, check the LED to determine
the cause of the problem and find possible remedies.
LED
PW (yellow) POWER
RN (green)
PLC program diagnostics
E1 (red)
Software watchdog
E2 (red)
PLC program error
Diagnostics program
The diagnostics program:
•
provides information for diagnosing problems with CAN
peripherals;
•
provides information for diagnosing problems with
GDNet peripherals;
•
provides information for diagnosing problems with
EtherCAT peripherals;
•
provides information for diagnosing problems with
GiLogik II devices;
•
accesses ICT (Industrial Central Terminal) diagnostics;
•
provides system information (firmware versions, disk
memory use, RAM use).
The diagnostics program can be inserted in a work application
and does not interfere with operation of the PLC.
Launch the diagnostics program as follows:
•
set the eView rotary selector to D,
or
•
call up the Diagnostics function from your application (if
present).
Calling up diagnostics pages requires closing the pages of
your application and opening pages of the system.
PLC operation does not change.
To return to your application pages, click the EXIT button on
the Index page.
The homescreen appears.
80949_MAN_eView BOX_05-2019_ENG
no.
49
of
14
March
Meaning
On steady
On steady
On steady
On steady
the separate collection of this piece of equipment at the end
of its useful life.
2014
Users wishing to dispose of the equipment must therefore
contact the manufacturer to obtain instructions from the
same on how to have the equipment collected separately at
the end of its useful life.
By collecting the disused equipment separately, it can
be recycled, treated or disposed of in an environmentally
friendly manner, thus helping to prevent the environment and
public health from being affected negatively and enabling
reuse and/or recycling of the materials forming the same
equipment.
Boot
On steady
On steady: application program exists, has been loaded,
and is running.
Off: Error, application program not running.
On: SW watchdog tripped.
On steady: PLC 1131 program not running.
Off: normal running
The top tool bar contains:
the Home, button for returning to the starting page
•
(Index);
the Prev, button for returning to the previous page;
•
•
the name of the current page;
•
the version of the diagnostics program.
The bottom tool bar contains buttons for accessing pages a:
•
Fieldbus (CANopen, GDNet, EtherCAT)
•
Diagnostics of GiLogik II devices
•
ICT (Industrial Central Terminal) diagnostics
•
System information
The tool bars are identical on all program pages.
Runtime
29
Advertisement
Table of Contents
