gefran eView BOX Installation And Instruction Manual page 36

The bottom zone shows a list of the variables present in that
buffer. The following are shown for each variable:
• Modbus Address.
• Dimension.
• DataType.
• Variable name
• Cause of error
• Error code
Push the "Return" button to return to device diagnostics
Advanced section
This button lets you access a lower level diagnostics section.
This section is not yet in use.
Error codes
Alarm codes managed by Modbus protocol:
0 - no error
200 - Serial ID opening error
SERIAL_OPEN_ERROR_ERROR_MSG_MODBUS_
PROTOCOL
201 - ICT buffer describer error
WRONG_ICT_BUFFER_DESCRIPTOR_ERROR_
MSG_MODBUS_PROTOCOL
202 -error in length of buffer to be built
WRONG_DATA_LENGTH_ERROR_MSG_MODBUS
PROTOCOL
203 - error in type of variable to be managed
WRONG_VAR_TYPE_ERROR_MSG_MODBUS_
PROTOCOL
204 - no reply message from device
NO_MESSAGE_RECEIVED_FROM_DEVICE_
ERROR_MSG_MODBUS_PROTOCOL
205 - FAULT message received from device
RECEIVED_FAULT_REPLY_ERROR_MSG_
MODBUS_PROTOCOL
206 - no dialog with MODBUS device
NO_DATA_MESSAGE_RECEIVED_FROM_DEVICE_
ERROR_MSG_MODBUS_PROTOCOL
207 - error in CRC of packet received
WRONG_CRC_VALUE_ERROR_MSG_MODBUS_
PROTOCOL
36
208 - error in CLIENT-ADDRESS field of packet received
WRONG_CLIENT_ADDRESS_VALUE_ERROR_
MSG_MODBUS_PROTOCOL
209 - error in COMMAND field of packet received
WRONG_COMMAND_VALUE_ERROR_MSG_
MODBUS_PROTOCOL
210 - error in START-ADDRESS field of packet received
WRONG_START_ADDR_VALUE_ERROR_MSG_
MODBUS_PROTOCOL
211 - error in R-COUNT field of packet received
WRONG_R_COUNT_VALUE_ERROR_MSG_
MODBUS_PROTOCOL
212 - error in N-DATA field of packet received
WRONG_N_DATA_VALUE_ERROR_MSG_
MODBUS_PROTOCOL
213 - invalid CLIENT-ADDRESS requested
CLIENT_ADDRESS_VALUE_NOT_VALID_ERROR_
MSG_MODBUS_PROTOCOL
214 - invalid TRANSACTION_ID received
TRANSACTION_ID_ERROR_MSG_MODBUS_TCP_
PROTOCOL
215 - invalid PROTOCOL_ID received
PROTOCOL_ID_ERROR_MSG_MODBUS_TCP_
PROTOCOL
216 - invalid DATA_LENGTH received
DATA_LENGTH_ERROR_MSG_MODBUS_TCP_
PROTOCOL
217 - socket opening error
SOCKET_OPEN_ERROR_MSG_MODBUS_TCP_
PROTOCOL
218 - server address or name assignment error
80949_MAN_eView BOX_05-2019_ENG