Table of Contents
Advertisement
Quick Links
eView HD IP67
OPERATING INSTRUCTIONS MANUAL
codice: 80588_10-2019 - ENG
ATTENTION!
This manual must always be available to operators of the
devices described here.
Always make sure that you have the latest version of the
manual, which is available for free download from the GEFRAN
website (www.gefran.com).
Installers and/or maintenance personnel are required to read
this manual and to precisely follow the instructions contained
in it and in its attachments.
GEFRAN will not be liable for any damage to persons and/or
property, or to the product itself, caused by failure to follow
the instructions and observe the warnings given below.
This manual and its attachments may be freely reproduced
as long as they are not changed in any way and every copy
contains this warning and the declaration of ownership by
Gefran S.p.A.
Advertisement
Table of Contents
Related Manuals for gefran eView HD IP67 Series
Summary of Contents for gefran eView HD IP67 Series
- Page 1 GEFRAN will not be liable for any damage to persons and/or property, or to the product itself, caused by failure to follow the instructions and observe the warnings given below.
- Page 2 CODE UPDATE N. pages of the document Copyright © 2018 Gefran Soluzioni Subject to change without notice The information contained in this document is provided for informational purposes only. While efforts were made to verify the accuracy of the information contained in this documentation, it is provided “as is” without warranty of any kind.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. PRODUCT OVERVIEW ........... 5 2. STANDARDS AND APPROVALS ........5 3. TECHNICAL SPECIFICATIONS ........7 4. TECHNICAL DATA ............9 4.1. Dimensions .............. 10 4.2. Installation Environment and procedure ....12 4.3. Safety instruction ............ 12 5. - Page 4 The operational guidelines described below is information This Operating Instruction describes the main features of the which relates to the device, installation, transportation, Gefran Soluzioni srl operator panels. The Manual refers to the storage, assembly, use and maintenance. following models eView HD 101 IP67 Field-ready HMI 10.1”...
-
Page 5: Product Overview
1. PRODUCT OVERVIEW eView HD IP67 products are ideal for field installation in The eView HD IP67 product family has been optimized for critical areas. High-resolution displays and multitouch PCAP use as an embedded browser or as a GF designer HD device. touchscreen with a robust glass front. - Page 6 You will have to know the type of unit you are using An example of the information reported is shown below: product model name eView HD101-52-00-67 year/week of production 1924 serial number AA00013TF123456789AA manufacturer address Gefran Soluzioni Srl Via Sebina, 74 25050 Provaglio d’Iseo (BS) 80588_eView HD IP67_02-2019_ENG...
-
Page 7: Technical Specifications
3. TECHNICAL SPECIFICATIONS Touchscreen technology Projected capacitive - Multitouch Back-up battery 3V 7mAh Vanadium-Lithium, rechargeable, not user-replacea ble, model VL1220. Flash 4GB (8GB for eView HD 156 IP67 and eView HD 215 IP67) 1GB (2GB for eView HD 156 IP67 and eView HD 215 IP67) Hardware clock Clock/Calendar with back-up battery Accuracy RTC (at 25°C) - Page 8 Projected capacitive touch screens (PCAP) are suitable for operation with or without gloves. A large number of gloves (rubber gloves, light/heavy leather gloves, disposable latex gloves, etc.) are supported. Due to the variety of commercially available gloves, however, Gefran Soluzioni cannot guarantee all types. 80588_eView HD IP67_02-2019_ENG...
-
Page 9: Technical Data
4. TECHNICAL DATA Model eView HD 101 IP67 eView HD 156 IP67 eView HD 215 IP67 Display / Backlight TFT Color / LED Colors Resolution 1280X800 1366X768 1920X1080 Diagonal (inches) 10.1” widescreen 15.6” widescreen 21.5” widescreen Viewing angles Direction L / Direction R Direction L / Direction R Direction L / Direction R horizontal... -
Page 10: Dimensions
4.1. Dimensions MODEL eView HD 101 IP67 183.1mm/7.20” 264.5mm/10.41” 16,5mm/0.64” 17mm/0.66” MODEL eView HD 156 IP67 248mm/9.76” 398.6mm/15.69” 26,5mm/1.04” 17mm/0.66” 80588_eView HD IP67_02-2019_ENG... - Page 11 MODEL eView HD 215 IP67 325.6mm/12.81” 534.1mm/21.02” 26,5mm/1.04” 17mm/0.66” Rear view 80588_eView HD IP67_02-2019_ENG...
-
Page 12: Installation Environment And Procedure
4.2. Installation Environment and procedure Avoid prolonged exposition to direct sunlight to avoid the risk The IP67 is guaranteed only if: of overheating the device. • max deviation from the plane surface to the cut-out: O0.5mm • thickness of the case where is mounted the equipment: The equipment is not intended for installation in contact with from 1,5mm to 6mm corrosive chemical compounds. -
Page 13: Connections
5. CONNECTIONS 5.1. Ethernet Port Description Reserved The Ethernet port have two status indicators. Please see description in figure. Green ON: No activity OFF: Valid link has NOT been detected BLINKING: Activity ON: Valid link has been detected 80588_eView HD IP67_02-2019_ENG... -
Page 14: Power Supply, Grounding And Shielding
6. POWER SUPPL Y , GROUNDING AND SHIELDING The power supply terminal block is shown in the figure below. Fig. 6.1 Use a shielded CAT 5 cable or higher The earth connection can also be made using the screws located near the connector. A label helps identify the ground Note: Ensure that the power supply has enough power connection. -
Page 15: Battery
7. BATTERY These devices are equipped with rechargeable Lithium battery, Charge: not user-replaceable. At first installation must be charged for 48 hours. The following information is maintained by the battery: When the battery is fully charged, it ensures a period of 3 •... - Page 16 Fig. 7.5: eView HD 215 IP67 ATTENTION ATTENTION Dispose of batteries according to local This device cannot be disposed of as a regulations. domestic waste but according to WEEE European Directive 2012/19/EU 80588_eView HD IP67_02-2019_ENG...
-
Page 17: Special Instruction For Use
8. SPECIAL INSTRUCTION FOR USE - The equipment shall only be used in an area of not more than - Only qualified personnel may install the HMI device or pollution degree 2, as defined in IEC/EN 60664-1. repair it. - The equipment shall be installed in an enclosure that provides - Care shall be taken not to allow layers of dust to form on the a degree of protection not less than IP 54 in accordance with graphic panel in a way that might cause the accumulation of... -
Page 18: System Settings
10. SYSTEM SETTINGS eView HD IP67 HMI products have a system settings interface enter the address https://IP/machine_config where IP is the to allow configuration of system options. IP address of the HMI device. Default username is “admin”, The user interface of System Settings is based on HTML default password is “admin”. - Page 19 Network Configure IP Address of Ethernet interface and the other network settings like DNS, Gateway, DHCP, Hostname, routing and bridging. Services Enable/disable services. Examples of services are: OpenSSH server, Bridge, Cloud, Router, SNMP and logging. Management Update of BSP components (Main OS, Config OS, Boot loader, XLoader), check for partitions consistence, update of splash screen, information about usage and size...
-
Page 20: Unpacking And Packing Instructions
11. UNPACKING AND PACKING INSTRUCTIONS Fig. 11.1: eView HD 101 IP67 Fig. 11.2: eView HD 156 IP67, eView HD 215 IP67 To repack the unit, please follow the instructions backwards. 80588_eView HD IP67_02-2019_ENG... - Page 21 NOTE NOTE 80588_eView HD IP67_02-2019_ENG...
- Page 22 NOTE 80588_eView HD IP67_02-2019_ENG...
- Page 23 NOTE 80588_eView HD IP67_02-2019_ENG...
- Page 24 Gefran Soluzioni srl Via Sebina 74 - 25050 Provaglio d’Iseo (BS) Italy Tel. +39 0309888.1 - Fax +39 0309839063 - info@gefran.com http://www.gefran.com www.gefran.com/en/gefran-soluzioni...