DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Diagnostic
The tool editor also allows creating a new tool. To do this, select an empty tool
memory using the cursor keys and open the editor by pressing <F2>. At least
one tool number (T Number) must be assigned.
Fig.9-15:
Diagnostic messages
The diagnostic screen displays a list of current diagnostic messages. It also
shows the number, time of appearance and the message text for each mes‐
sage. The lower area shows the cause and the recovery text for each message
that has been selected with the cursor keys.
The error messages are entered in a logbook which can be opened with <F4>.
Bosch Rexroth AG
Operating the IndraMotion MTX micro
121/141