24-V Control Voltage Supply - Bosch Rexroth IndraMotion MTX micro Commissioning Manual

36/141 Bosch Rexroth AG
Selecting and Connecting the Hardware

24-V Control Voltage Supply

Calculation example
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
When dimensioning the control voltage supply for the MTX micro-c, please ob‐
serve the power consumption figures of the following components:
● Voltage supply of the HCQ/HCT device
● Digital inputs and outputs (onboard)
● Optional modules
● Activation of the motor brakes
● HMI control panel
Fig.4-12: MTX micro-c control voltage supply
Configure the 24-V voltage supply for the following example MTX micro-c sys‐
tem:
● CNC system HCQ02.1 with
– spindle, 11 kW, without brake;
– 2 servo motors, 12 Nm, without brake;
– 1 servo motor, 17 Nm, with brake;
– 1 optional module DEA40.1.
● HMI control panel VDP80.1
DOK-MTXMIC-EASY*******-CO04-EN-P