DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
6
PLC Startup
6.1
Downloading the PLC System Program
After the communication parameters have been set and the parameters of the
basic project have been downloaded, the PLC system program must first be
downloaded. Proceed as follows:
1. Compile the program with "Build – Build Application".
2. The message window is opened during compilation. The display shows
information on the compilation progress.
3. After completed compilation, transfer the program to the control with "De‐
bug – Login to Application". After the transfer has been completed suc‐
cessfully, the programming system is in online mode.
4. Start the program with "Debug – Start Application" in the final step. The
system program is now running.
Fig.6-1:
Downloading the PLC system program
Bosch Rexroth AG
59/141
PLC Startup