Editing Parameters - Bosch Rexroth IndraMotion MTX micro Commissioning Manual

122/141 Bosch Rexroth AG
Operating the IndraMotion MTX micro
9.2.5

Editing Parameters

Editing CNC parameters
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
All CNC and drive parameters can be edited using the HMI software.
Fig.9-16: CNC parameter editor
Proceed as follows to edit a CNC parameter:
1. Log in as OEM or Developer user.
2. Open the <System> operating area.
3. Press <F2> (Param).
4. Select the parameter type (e.g., AX for axis parameter) using the machine
keys.
5. Select the desired parameter using the cursor keys.
6. Press <Enter> to switch to edit mode.
7. Restart the system after having made your changes.
DOK-MTXMIC-EASY*******-CO04-EN-P