Table of Contents
Advertisement
On the System IP screen, you can adjust the network
4.
configuration settings by selecting the Static radio button on
the IP Configure field,
If the IP Configure field is set to DHCP mode, all other
5.
settings will be ignored, and the IP address will be assigned
by DHCP server after resetting the device.
Press the Update button to apply the network changes and
6.
reset the default for the changes to take place.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
System IP Screen
13
Advertisement
Table of Contents
Need help?
Do you have a question about the NETRS2321P and is the answer not in the manual?