Table of Contents
Advertisement
Product Information
Package Contents
Serial over IP Device Server x 1
•
Universal Power Adapter (NA/UK/EU/AU) x 1
•
User Manual x 1
•
DIN Rail Kit x 1
•
Installation
Plug in the power adapter and connect the RJ45 interface to
1.
your LAN.
NOTE: Alternatively, you can also use a crossover cable to
connect the NETRS2321P directly to your system for the initial
configuration.
Press and hold the load default button for more than 3
2.
seconds and less than 10 seconds, then release it. This will
return the serial device server to factory default and it will
respond to the IP address 10.1.1.1.
Configure the PC to the same IP domain.
3.
Open a web browser and connect to http://10.1.1.1 to
4.
open the configuration interface. The default login ID will be
"admin" and the password will be "admin".
Once logged in, you will have access to all configuration
5.
settings including the ability to change the IP address for the
device server.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
9
Advertisement
Table of Contents
Need help?
Do you have a question about the NETRS2321P and is the answer not in the manual?