Remote Port - StarTech.com NETRS2321P User Manual

Remote Port

TCP Server – Disabled
•
TCP Client – Assign the remote TCP port you wish to
•
communicate on.
UDP – Assign the remote UDP port you wish to communicate
•
on
Enable Control Connection (TCP Server or Client Only)
Enables/Disables control of the serial device on a remote
•
network. Using the IP address and port number allows the
user to gain control of the receiver from a remote location
when this is enabled.
Second(s) for Reconnection Interval
Dictates the duration that the software will automatically
•
attempt to reconnect the COM port to the serial port on
the serial device server, for the purpose of keeping the
connection alive.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
30