StarTech.com NETRS2321P User Manual page 23

Parity Type: Set the parity of UART interface. The
•
NETRS2321P supports parity settings of Odd, Even, Space,
Mark or none.
Stop Bit: Set the stop bit length of UART interface. The
•
NETRS2321P supports 1, 1.5 or 2 stop bits.
Hardware Flow Control: Set the flow control mode of
•
UART interface as enabled or as none.
UART Memory Overflow Count: Shows the number of
•
overflow bytes in network buffer.
UART FIFO Overflow Count: Shows the number of
•
overflows counted in the UART RX buffer.
Delimiter: This sets the Character 1 and/or Character 2 to
•
be used as the delimiter. When sending data from serial to
TCP the data is first stored in the cache. When set, not until
the value of character 1 or 2 is received from the serial side
is the data released from the cache and sent to TCP.
Silent time: If there is no data sent or received for the
•
number of milliseconds specified the connection is
dropped.
Drop Character: drops the delimiter character of the
•
serial port when sending to TCP, (the receiver doesn't
display the character).
Once you have completed making changes, press the
4.
Update button to store the data.
Reset the device for the changes to take effect.
5.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
22