Table of Contents
Advertisement
On the Load Default Settings screen, you can load and store
4.
the factory default settings into EEPROM.
NOTE: Network settings and MAC address will not be
changed.
Press Load button to load default settings.
5.
Reset the device for the changes to take effect.
6.
Firmware Update
On this page, you can update the firmware via Ethernet.
Note: Pressing the 'Load' button will immediately erase the
flash with no further warning
From the Home screen, click the Administrator link on the
1.
left-hand side of the screen.
From the drop down menu select the Load Default Settings
2.
link.
The Load Default Settings screen will appear.
3.
Press the Load button to erase flash.
1.
Wait for erase process to complete.
2.
There are two methods to do the Firmware Update action
3.
(TFTP or Web):
Note: Please avoid loss of network connection, power or
other interruption during the firmware upgrade procedure.
Web:
•
Please type in or browse the target image file in the input
•
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15
Advertisement
Table of Contents
Need help?
Do you have a question about the NETRS2321P and is the answer not in the manual?