Din Rail Mounting; Load Default Settings/System Reset Button; Load Default Settings; System Reset - StarTech.com NETRS2321P User Manual

1 port rs232 serial over ip ethernet device server

Hide thumbs Also See for NETRS2321P:

Table of Contents

DIN Rail Mounting

Attach the included DIN Rail brackets (one per side) using the

•

provided screws to the top DIN Rail screw hole (marked in the

above diagram), and clip to your DIN Rail

Press and hold this button for more than 3 seconds, then

•

release to load the factory default settings.

IP address: 10.1.1.1

Subnet Mask: 255.0.0.0

Press and hold this button for more than 10 seconds, then

•

release to reboot the device (maintains configuration

settings)

The Broadcast Search function is used to locate all

•

NETRS2321P devices that are connected to the same LAN

as your computer. Since the Broadcast Search function

searches by MAC address and not IP address, all NETRS2321P

connected to the LAN will be located, regardless of whether

or not they are part of the same subnet as the host.

NOTE: Broadcast packet packets are not passed through a

router. The VCom utility can only be used to monitor devices

in the same segment of the LAN.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Do you have a question about the NETRS2321P and is the answer not in the manual?