User Values For The Customer; User Values For The Administrator - Honeywell Elster EK280 Applications Manual

EK280

2.1.3 User values for the customer

i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster.com.
All values displayed on the "Cust." tab, can be set using enSuite:
Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.
Start enSuite and set up the communication link to the EK280. (see chapter 3.1
communication link to the EK280 via optical interface
Select "Navigation" on the left-hand side and then
navigation window.
In the top of the device window open the path "Parameter" > "
clicking on the relevant plus signs, and then select
On the "All Parameters" tab on the right-hand side of the window you may now select the values to be
displayed. Here click once or twice on an entry in the "Value" column, to the right hand side of the
value a button with 3 dots will appear. Pressing this button will allow you to select a new value to be
displayed for this position in the display.
Once you have set all values, click on the
window.

2.1.4 User Values for the Administrator

i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster.com.
All values displayed on the "Admin." tab under
Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.
Start enSuite and set up the communication link to the EK280. (see chapter 3.1
communication link to the EK280 via optical interface
Select "Navigation" on the left-hand side and then "
navigation window.
In the top of the device window open the path "Parameter" > "
clicking on the relevant plus signs, and then select
On the " All Parameters
be displayed. Here click once or twice on an entry in the "
the value a button with 3 dots will appear. Pressing this button will allow you to select a new value to
be displayed for this position in the display.
The first ten values set will be displayed in the
populate the "User values
Once you have set all values, click on the "
window.
Application Manual
"Transfer changes to
"User values" can be set using enSuite:
" tab on the right-hand side of the window you may now select the values to
"User values
" > "further..." paths.
Transfer changes to device
", page 9)
"Parameterize online " at the bottom of the
Device adjustment
"User column "Customer".
device" icon at the top of the enSuite
", page 9)
Parameterize online " at the bottom of the
Device adjustment
"User column "Administrator".
Value " column, to the right hand side of
" path, the following ten values will
" icon at the top of the enSuite
5
"Setting up the
" > "Display" by
"Setting up the
" > " Display " by