Fe260 With Rs232/Rs485 Interface Card - Honeywell Elster EK280 Applications Manual

EK280

6.3.8 FE260 with RS232/RS485 interface card

Modem adapter board 73016717 V1.2
with attached telephone cable
This interface card is used to communicate with PCs and other serial interface devices.
6.3.8.1 Preparation
Prerequisites for process described below:
The RS232/RS485 interface card (Elster No. 04407045) has been installed on a modem adapter
board (Elster No. 73016717) as described in "Vormontage_Analog_ISDN_CL_FA_a.doc".
This modem adapter board must be configured with the modem parameterization adapter, as
described in this document.
This modem adapter board must then be installed in the FE260.
The FE260 is connected and configured as described in chapter 6.3.1.
The serial communication link to the PC or other device is set up.
6.3.8.2 EK280 Parameterization
i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster.com.
a) Connecting the time window
For the parameterization to work correctly, time windows 5 and 6 must be connected. To do this:
Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.
Start enSuite and set up the communication link to the EK280. (see chapter 3.1
communication link to the EK280 via optical interface
Select "Navigation" on the left-hand side and then
navigation window.
In the top of the device window open the path "Parameter" > "Interfaces" by clicking on the relevant
plus signs, and then select
In call windows 5 and 6 set start and end to the same value for each one and then select the
changes to device" icon at the top of the enSuite window.
Then wait a minute, for any communications activity in progress on the EK280 to be safely stopped.
Application Manual
Figure 12: Insys analog adapter in the FE260
"Call time windows".
Insys analog module
", page 9)
"Parameterize online" at the bottom of the
49
"Setting up the
"Transfer