Honeywell Elster EK280 Applications Manual page 62

EK280
6.4.4.2 EK280 jumpers
X6: No jumper
or one jumper on the pins located
near the terminals
6.4.4.3 EK280 Parameterization
i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster.com.
Follow the steps given in chapter 6.4.3.3, EK280 Parameterization, page 58.
Application Manual
X5: two jumpers
on the pins located
furthest from the terminals.
60