Honeywell Elster EK280 Applications Manual page 58

EK280
plus signs, and then select
For call window 5 set the start to "00:00" and the end to "23:59" and then select the
to device" icon at the top of the enSuite window.
Wait for around a minute for the EK280 to detect the FE260.
Press the "Transfer changes to
6.4.2.5 Retrieving data with enSuite
Connect your PC or laptop to the MTL5051 as an "RS232 device" as described in chapter 6.4.2.1.
If the communication link to the EK280 is via the optical interface, press the "Disconnect" or the
"Disconnect from all
EK280 and then wait for the "o" on the EK280 display to stop flashing.
Start the enSuite program (i.e.:
Select the "Search
In the "Search device and
Select "Access"
default settings"
Select the "Baudrate:" "9600".
Press "OK".
After a few seconds "connected" is displayed at the bottom of the "Output" window.
Once the communication link is set up, you can carry out checks, for instance view certain parameters.
To do this press "Navigation" on the left-hand side of the enSuite window and then
online" in the bottom of the navigation window, then click on the plus sign next to "Parameter" and
then its subsections.
In enSuite press the "Disconnect" symbol or
Application Manual
"Call time windows".
device" icon at the top of the enSuite window.
devices" icon to terminate the communication link between enSuite and the
Start > Programs > Elster >
device..." icon (magnifying glass icon).
connect" window select the "LIS200" tab.
"LIS200"," User" "Administrator", "Connection"
enSuite).
"Disconnect from all devices" to end the test retrieval.
"Transfer changes
"Serial RS232" and "use
"Parameterize
56