Loading Material; Loading Label Rolls; Adjusting The Roll Retainer - CAB MACH 4.3S/200B Operator's Manual

4

Loading Material

4.1

Loading Label Rolls

4.1.1

Adjusting the Roll Retainer

Label rolls are supplied with different diameters. The roll retainer can hold label rolls with a core diameter of 38 - 75
mm, or 76 mm with the detachable adapters fitted.
1
Figure 9 Adapting the roll retainer
Dismounting the adapter
 Open the cover and remove the roll retainer (3) with the margin stops (1,4) from the printer.
 Press the lever (5) and remove the margin stop (4) from the roll retainer (3).
 Press the adapter (2) in at 3 pressure point as shown in the figure, and remove it.
Mounting the adapter
 Push the adapter (2) on until it slots into place.
2
3
2
4
5
11