Loading Material; Loading Labels Or Continuous Media From Roll; Positioning The Media Roll On The Roll Retainer - CAB A4+M Operator's Manual

12 4

Loading Material

Notice!
i
For adjustments and simple installation work, use the accompanying Allen key located in the upper section
of the print unit. No other tools are required for the work described here.
4.1

Loading Labels or Continuous Media from Roll

4.1.1

Positioning the Media Roll on the Roll Retainer

Fig. 6
1. Open cover (13).
2. Turn ring (5) counterclockwise, so that the arrow (6) points to the symbol
(4).
3. Remove the margin stop (4) from the roll retainer (3).
4. Load label roll (2) on the roll retainer (3) in such a way that the labels can be inserted into the printhead in the
right position. The printing side of the labels must be visible from above.
5. Re-mount the margin stop (4) onto the roll retainer (3). Push the margin stop (4) until both margin stops (1, 4)
touch the label roll (2) and a clear resistance is encountered.
6. Turn ring (5) clockwise, so that the arrow (6) points to the symbol
retainer (3).
13
12
11
Fig. 8
1
2
3
4
5
Loading media from roll
10 9 8 7
A4+M
Material feed path
4
6
5
3
Fig. 7 Margin stop unfixed (left) and fixed (right)
, and thus release the margin stop
, and thus fix the margin stop (4) on the roll
13
12
15
14
12
11 10 9 8 7
A4+T