Hvs-Tal Protocol Reception - FOR-A MFR Series Operation Manual

9-3-3. HVS-TAL Protocol Reception

The HVS-TAL Protocol Reception page allows you to set up Hanabi series serial tallies to be
received.

Tally Unit settings
Click the Tally Unit tab.
Parameter
Tally Unit Specifies a Hanabi Tally Unit by specifying the ID number.
Pin No Indicates the tally unit's Pin Number.
Color Selects a tally Color assigned to each pin.
Input Selects an Input signal or bus assigned to each pin.

Tally Color Settings
Click the Tally Color tab.
Parameter
Select Color Selects a tally Color for use.
Select Bus Selects an output Bus, to which the tally color selected above is assigned in
the Hanabi series switcher.
IMPORTANT
Settings in this page must be the same as those in the Hanabi series switcher.
Description
Description
92