Slot Status - FOR-A MFR Series Operation Manual

5-3. Slot Status

A Slot Status page as shown below appears for MFR-5000/8000/3000 main units. This page
allows you to check power monitoring results and temperature readings for each slot.

MFR-5000/8000
Clicking a board displays the information below.
Board Name Displays the slot type.
* V Displays the power voltage states.
Temperature Displays the temperature. (Centigrade)
SDI Status Displays the presence/absence of SDI
signal.
Reclock Displays the reclock status of SDI
signal.
Version Displays the FPGA and F/W version.
Display contents may vary depending on cards installed.

MFR-3000
No. Item
Selects how to shutdown installed
boards.
Slot By RearSwitch: Uses the
1
Shutdown MFR-3000 rear panel power switch.
By SlotStatus: Uses the Slot Power
buttons on the Slot Status screen.
Displays board power supply status.
If By SlotStatus is selected above,
2 Slot Power
works as board power ON/OFF
button.
Clicking a board displays the board
3 Board
status.

To turn board power ON/OFF on the Slot Status page
1. Click a Slot Power button. In the right figure, the Slot
2 board will power off.
2. Click Send to turn off the Slot2 power.
Description
Description
53