Setting and Releasing an Inhibition
1.
Double-click a crosspoint cell. An X mark will be displayed in the cell.
2.
Click the Send button to inhibit the setting.
In the same way, click the cell where an inhibition is applied. The X mark disappears. Click the
Send button to release the inhibition. Up to 50,000 inhibition settings can be stored in the
MFR-5000/8000/3000 units and 8,192 in the MFR-1000/1616/1616R/3216/3232/1616A units.
4-1-6. Salvo
The Salvo page allows you to select salvo settings.
Copying from Current Crosspoint
Selecting the Copy button allows you to copy settings from current crosspoint.
Registering a Salvo
2.
3.
5.
1.
In the Level area, select Enabled/Disabled for each level. (Enabled: Yellow, Disabled:
Gray)
2.
In the Entry area, select Setting.
If you select the Cancel Select button, destination channel select is cancelled.
1.
4.
22
6.