Multi-Step Mode; Lock Setting - FOR-A MFR Series Operation Manual

7-2. Multi-Step Mode

Multi-Step Mode changes crosspoints one by one using Take.
Let's set DST 4 for SRC 20 as an example.
(1) Lick Multi-Step in Mode.
(2) Click a level to switch.
(3) Select a destination channel.
Select DST 4 as an example.
(4) Select a source channel.
Select SRC 20 as an example.
(5) Click Take.
DST 4 is switched to SRC 20.

7-3. Lock Setting

The Crosspoint Settings page allows you to set LOCK ALL (A function to inhibit crosspoint
switching from other units.) to desired destinations and release LOCK OTHER or LOCK ALL
settings as specified by the main unit.

LOCK ALL
Let's set LOCK ALL to DST 5.
(1) Click to DST 5.
(2) Click Lock / Unlock to set the
destination to LOCK ALL.
(3) To verify the Lock All status, move the
mouse over DST 5.
"Lock All: Locked" is displayed if a
destination is set to LOCK ALL.
(2)
(3)
(1)
(3)
84
(1)
(4)
(5)
(2)