Auerswald COMpact 5010 VoIP Installation And Commissioning Instructions page 25

Steps to take
1.
Lay the line.
Note: Prevent interference. Avoid laying long lengths
of parallel lines, especially next to mains. Twist the
pairs.
2.
Attach the wires to the two terminal clamps in the in-
ternal a/b port. See Abb.
3.
Connect the wall sockets to the terminal clamps in the
internal a/b port. See Abb.
Further steps
Connect the end devices to the wall sockets.
Note: For TAE jacks, insert the connection plug for
the telephones or combination fax/answering machi-
nes into the socket labelled with "F" and insert the
connection plug of the remaining devices into the
socket labelled with "N".
Abb. 18: Wall sockets on the internal a/b port
18.
18.
Connecting Analogue Devices
25