Auerswald COMpact 5010 VoIP Installation And Commissioning Instructions page 11

Type of dialling DTMF
Reception amplifica- configurable: 0 to +12 dB
tion
Transmission amplifi- Configurable: 0 to +12 dB
cation
Ringer signal fre- Configurable: 16/25/50 Hz
quency
CLIP detection Configurable: V.23 FSK/DTMF
End of Call detection Configurable:
DTMF code "D"
Polarity reversal of the line
Loop current detection
Impedances a/b Configurable:
600 Ohm
900 Ohm
270/275 Ohm + 750/780 Ohm || 150nF
220 Ohm + 820 Ohm||115/120nF
370 Ohm + 620 Ohm||310nF
320 Ohm + 1050 Ohm||230nF
370 Ohm + 820 Ohm||110nF
275 Ohm + 780 Ohm||115nF
120 Ohm + 820 Ohm||110nF
350 Ohm + 1000 Ohm||210nF
200 Ohm + 680 Ohm||100nF
600 Ohm + 2.16uF
900 Ohm + 1.0uF
900 Ohm + 2.16uF
600 Ohm + 1.0uF
Global complex impedance
port
External S
0
Connection unit Terminal clamp (4-core), optional Western
socket
Connection type S basis access as Point-to-Multipoint con-
0
nection or as a PBX connection, EURO-
ISDN (DSS1), unit is powered locally
Ethernet port for internal IP and Internet telephony (VoIP) as well
as for a PC connection
Connection unit Western socket
Interface 10/100 Base-T (10/100 Mbit/s, RJ-45
twisted-pair),
Full/semi-duplex auto negotiation, Auto-
MDIX
VoIP standard SIP according to RFC 3261
VoIP codecs on the G.711
exchange line with VoIP module: G.711, G.723.1, G.726,
G.729 A/E, iLBC
VoIP codecs, internal G.711
with VoIP module: G.711, iLBC
End devices 1 end device per internal VoIP channel
USB host for printer
Important Information
Connection unit USB A-socket
Interface USB (Full Speed, V 1.1 or V 2.0)
Printer PCL4-compatible printer (HP Laserjet)
ESC/P-compatible printer (Epson)
Power supply outlet
Connection unit Terminal clamp (2-core)
Output voltage 12 VDC, 100 mA
Door terminal input/output
Connection unit Terminal clamp (2-core)
Interface FTZ 123 D12-0
Relay outputs
Connection unit Terminal clamp (2 x 2-core and 1 x 3-core)
Type of contact Potential-free, 2 operating current contacts
(NC), 1 operating and quiescent current
contact (NC and NO)
Contact load capacity max. 30 V/1 A
Ringer/alarm inputs
Connection unit Terminal clamp (2 x 2-core)
Input voltage Configurable: 0 V or 5-15 VAC/DC via the
door bell button (NC)
Active state Contact is closed for more than 0.5 s.
audio output/music input
Connection unit Cinch connector
Output level Max. 1 V
Input level Adjustable from -18 to +10 dB (1 V
Internal resistance 1 k
Miscellaneous
Cabinet Plastic, chassis with lid and protective cover
Dimensions Basic unit: 301 mm x 243 mm x 86.5 mm
(W x H x D) COMpact 2VoIP module: 37 x 43 x 3 mm
COMpact 6VoIP module: 52 x 53 x 3 mm
COMpact POTS module: 92 x 60 x 17 mm
COMpact 2POTS module: 92 x 60 x 17 mm
COMpact 2ISDN module: 92 x 60 x 16 mm
COMpact TSM module: 92 x 60 x 16 mm
Weight Basic unit: approx. 1500 g
COMpact 2VoIP module: approx. 6 g
COMpact 6VoIP module: approx. 12 g
COMpact POTS module: approx. 50 g
COMpact 2POTS module: approx. 50 g
COMpact 2ISDN module: approx. 50 g
COMpact TSM module: approx. 50 g
Safety CE, EN 60950
eff
)
eff
11