Continuous Recording - Vitek VT-SRL User Manual

\ \

Continuous Recording

you can configure the settings of: continuous recording time, recording size, frame rate per second and quality.
1.
From the <RECORDInG> menu, select <COnTInUOUS RECORDInG>.
From <OPERATIOn MODE>, you must set <RECORDInG COnFIGURATIOn MODE> to <MAnUAL COnFIGURATIOn> before you can

set the <COnTInUOUS RECORDInG>.
2.
Use the [▲▼◀▶] buttons on the remote control or use the mouse to select either <SIZE/FPS/QUALITy> or <SCHEDULE>.
Size/FPS/Quality Setting
1.
Please select the day of the week to perform continuous recording.
From <OPERATIOn MODE>, you must set
the <SCHEDULE MODE> of the <MAnUAL
COnFIGURATIOn OPTIOnS> to <wEEKLy> before
you can specify the <DAy>.
nOTE: If you want to configure every day with the
same record settings set the <SCHEDULE MODE> to
<DAILy>
2.
Click a time cell from which you want to edit the SIZE/
FPS/Quality and drag it to a desired cell.
Or use the [▲▼◀▶] buttons on the remote control to
move to the cell and press [EnTER]. Then, use the
[▲▼◀▶] buttons to move to a desired cell and press
[EnTER] again.
3.
when the cell selection is complete, the "SIZE/FPS/
QUALITy" table appears.
•
Specify the <RESOLUTIOn>, <FPS>, <QUALITy> and use
of the <AUDIO> recording for each channel.
i RESOLUTIOn : set the size of the video recording.
i FPS : set the frame rate per second.
i QUALITy : set the recording quality.
i AUDIO : specify the use of the audio recording.
4.
when done, click <OK>.
you can check the recording size in the size table under the time selection bar.
•
The video resolution and the FPS option may differ depending on the specification of the camera.
61